- 1. Software Requirements and Conventions Used
- 2. What is Docker?
- 3. Adding the external repository
- 4. Start and enable the docker daemon
- 5. Installing docker-compose
- 6. Testing docker
- 7. Conclusions
The latest release of the RHEL 8 / CentOS 8. Red Hat has built its own tools,
podman, which aim to be compatible with existing docker images and work without relying on a daemon, allowing the creation of containers as normal users, without the need of special permissions (with some limitations: e.g. at the moment of writing, it’s still not possible to map host ports to the container without privileges).
Some specific tools, however, are still missing: an equivalent of
docker-compose, for example does not exists yet. In this tutorial we will see how to install and run the original Docker CE on Rhel8 by using the official Docker repository for CentOS7.
In this tutorial you will learn:
- How to enable the docker-ce repository on RHEL 8 / CentOS 8
- How to install docker and docker-compose on RHEL 8 / CentOS 8
Software Requirements and Conventions Used
|Category||Requirements, Conventions or Software Version Used|
|System||RHEL 8 / CentOS 8|
|Software||Docker version 18.09.2|
|Other||Permission to run command with root privileges.|
|Conventions||# – requires given linux commands to be executed with root privileges either directly as a root user or by use of
$ – requires given linux commands to be executed as a regular non-privileged user
What is Docker?
Docker is an open source project which allows the creation and distribution of applications inside
containers, which are standardized environments that can be easily replicated, independently from the host system. While in Red Hat Enterprise Linux 7 Docker was officially supported, on the new release of this open source operating system, it has been replaced by a series of other tools developed by Red Hat itself:
By the use of an external repository, however, it’s still possible to install Docker CE (Community Edition). In this tutorial we will see how to install this repository; notice however, that it was originally meant for
CentOS 7 (a RHEL clone), and the community version of Docker has no official support for Red Hat Enterprise Linux. Because of this, issues exist – we discuss them below.
Adding the external repository
Since Docker is not available on RHEL 8 / CentOS 8, we need to add an external repository to obtain the software. In this case we will use the official Docker CE CentOS repository: this is, at the moment of writing, the only way to install Docker CE on RHEL 8 / CentOS 8.
dnf config-manager utility let us, among the other things, easily enable or disable a repository in our distribution. By default, only the
baseos repositories are enabled on Rhel8; we need to add and enable also the
docker-ce repo. All we need to do to accomplish this task, is to run the following command:
$ sudo dnf config-manager --add-repo=https://download.docker.com/linux/centos/docker-ce.repo
We can verify that the repository has been enabled, by looking at the output of the following command:
$ sudo dnf repolist -v
The command above will return detailed information about all the enabled repositories. This is what you should see at this point:
Repo-id : docker-ce-stable Repo-name : Docker CE Stable - x86_64 Repo-revision: 1549905809 Repo-updated : Mon 11 Feb 2019 06:23:29 PM CET Repo-pkgs : 30 Repo-size : 618 M Repo-baseurl : https://download.docker.com/linux/centos/7/x86_64/stable Repo-expire : 172,800 second(s) (last: Mon 18 Feb 2019 10:23:54 AM CET) Repo-filename: /etc/yum.repos.d/docker-ce.repo Repo-id : rhel-8-for-x86_64-appstream-rpms Repo-name : Red Hat Enterprise Linux 8 for x86_64 - AppStream Beta (RPMs) Repo-revision: 1542158694 Repo-updated : Wed 14 Nov 2018 02:24:54 AM CET Repo-pkgs : 4,594 Repo-size : 4.9 G Repo-baseurl : https://cdn.redhat.com/content/beta/rhel8/8/x86_64/appstream/os Repo-expire : 86,400 second(s) (last: Mon 18 Feb 2019 10:23:55 AM CET) Repo-filename: /etc/yum.repos.d/redhat.repo Repo-id : rhel-8-for-x86_64-baseos-rpms Repo-name : Red Hat Enterprise Linux 8 for x86_64 - BaseOS Beta (RPMs) Repo-revision: 1542158719 Repo-updated : Wed 14 Nov 2018 02:25:19 AM CET Repo-pkgs : 1,686 Repo-size : 925 M Repo-baseurl : https://cdn.redhat.com/content/beta/rhel8/8/x86_64/baseos/os Repo-expire : 86,400 second(s) (last: Mon 18 Feb 2019 10:23:56 AM CET) Repo-filename: /etc/yum.repos.d/redhat.repo Total packages: 6,310
docker-ce-stable repository is now enabled on our system. The repository contains several versions of the
docker-ce package, to display all of them, we can run:
$ dnf list docker-ce --showduplicates | sort -r docker-ce.x86_64 3:19.03.2-3.el7 docker-ce-stable docker-ce.x86_64 3:19.03.1-3.el7 docker-ce-stable docker-ce.x86_64 3:19.03.0-3.el7 docker-ce-stable docker-ce.x86_64 3:18.09.9-3.el7 docker-ce-stable docker-ce.x86_64 3:18.09.8-3.el7 docker-ce-stable docker-ce.x86_64 3:18.09.7-3.el7 docker-ce-stable docker-ce.x86_64 3:18.09.6-3.el7 docker-ce-stable docker-ce.x86_64 3:18.09.5-3.el7 docker-ce-stable docker-ce.x86_64 3:18.09.4-3.el7 docker-ce-stable docker-ce.x86_64 3:18.09.3-3.el7 docker-ce-stable docker-ce.x86_64 3:18.09.2-3.el7 docker-ce-stable docker-ce.x86_64 3:18.09.1-3.el7 docker-ce-stable docker-ce.x86_64 3:18.09.0-3.el7 docker-ce-stable docker-ce.x86_64 18.06.3.ce-3.el7 docker-ce-stable docker-ce.x86_64 18.06.2.ce-3.el7 docker-ce-stable docker-ce.x86_64 18.06.1.ce-3.el7 docker-ce-stable docker-ce.x86_64 18.06.0.ce-3.el7 docker-ce-stable docker-ce.x86_64 18.03.1.ce-1.el7.centos docker-ce-stable docker-ce.x86_64 18.03.0.ce-1.el7.centos docker-ce-stable docker-ce.x86_64 17.12.1.ce-1.el7.centos docker-ce-stable docker-ce.x86_64 17.12.0.ce-1.el7.centos docker-ce-stable docker-ce.x86_64 17.09.1.ce-1.el7.centos docker-ce-stable docker-ce.x86_64 17.09.0.ce-1.el7.centos docker-ce-stable docker-ce.x86_64 17.06.2.ce-1.el7.centos docker-ce-stable docker-ce.x86_64 17.06.1.ce-1.el7.centos docker-ce-stable docker-ce.x86_64 17.06.0.ce-1.el7.centos docker-ce-stable docker-ce.x86_64 17.03.3.ce-1.el7 docker-ce-stable docker-ce.x86_64 17.03.2.ce-1.el7.centos docker-ce-stable docker-ce.x86_64 17.03.1.ce-1.el7.centos docker-ce-stable docker-ce.x86_64 17.03.0.ce-1.el7.centos docker-ce-stable
What version to install? Well, Red Hat seems to have somehow blocked the installation of
1.2.0-3.el7, which is a dependency of
docker-ce. Because of this, simply running the
sudo dnf install docker-ce command, won’t work. As we will see in a minute, it’s still possibile to workaround this problem; once
docker-ce is installed, however, another problem becomes evident: as long as
firewalld, the system firewall manager is enabled,
DNS resolution inside docker containers does not work.
This is, of course a critical problem. However, if you still want to proceed with the installation, here are the possible methods that can be used to avoid the dependencies issues:
- Install a specific version of
docker-cewhich requires an installable version of the
- Force the installation providing the
- Install the latest available
Install a specific version of docker-ce
At the moment of writing the versions of
docker-ce that are installed without problems are:
To install a specific version, all we have to do is to provide the fully qualified package name, for example:
$ sudo dnf install docker-ce-3:18.09.1-3.el7
Force the installation of docker-ce with the –nobest option
Normally, when installing a package, the best available candidate is selected from a repository. In this case, for example, the installation of the latest version of
docker-ce is attempted (and fails). By using the
--nobest option, we can change this behavior so that the first version of
docker-ce with satisfiable dependencies is selected as “fallback”, in this case
$ sudo dnf install --nobest docker-ce Dependencies resolved. Problem: package docker-ce-3:19.03.2-3.el7.x86_64 requires containerd.io >= 1.2.2-3, but none of the providers can be installed - cannot install the best candidate for the job - package containerd.io-1.2.2-3.3.el7.x86_64 is excluded - package containerd.io-1.2.2-3.el7.x86_64 is excluded - package containerd.io-1.2.4-3.1.el7.x86_64 is excluded - package containerd.io-1.2.5-3.1.el7.x86_64 is excluded - package containerd.io-1.2.6-3.3.el7.x86_64 is excluded ======================================================================================================================================================= Package Arch Version Repository Size ======================================================================================================================================================= Installing: docker-ce x86_64 3:18.09.1-3.el7 docker-ce-stable 19 M Installing dependencies: containerd.io x86_64 1.2.0-3.el7 docker-ce-stable 22 M docker-ce-cli x86_64 1:19.03.2-3.el7 docker-ce-stable 39 M container-selinux noarch 2:2.94-1.git1e99f1d.module+el8.0.0+4017+bbba319f rhel-8-for-x86_64-appstream-rpms 43 k tar x86_64 2:1.30-4.el8 rhel-8-for-x86_64-baseos-rpms 838 k libcgroup x86_64 0.41-19.el8 rhel-8-for-x86_64-baseos-rpms 70 k python3-policycoreutils noarch 2.8-16.1.el8 rhel-8-for-x86_64-baseos-rpms 2.2 M python3-libsemanage x86_64 2.8-5.el8 rhel-8-for-x86_64-baseos-rpms 127 k python3-setools x86_64 4.2.0-2.el8 rhel-8-for-x86_64-baseos-rpms 598 k checkpolicy x86_64 2.8-2.el8 rhel-8-for-x86_64-baseos-rpms 338 k python3-audit x86_64 3.0-0.10.20180831git0047a6c.el8 rhel-8-for-x86_64-baseos-rpms 85 k policycoreutils-python-utils noarch 2.8-16.1.el8 rhel-8-for-x86_64-baseos-rpms 228 k Skipping packages with broken dependencies: docker-ce x86_64 3:19.03.2-3.el7 docker-ce-stable 24 M Transaction Summary ======================================================================================================================================================= Install 12 Packages Skip 1 Package Total download size: 85 M Installed size: 351 M Is this ok [y/N]:
Install the latest available containerd.io package manually
If we stricly need to install the latest version of
docker-ce, we can install the required version of
containerd.io manually, by running:
$ sudo dnf install https://download.docker.com/linux/centos/7/x86_64/stable/Packages/containerd.io-1.2.6-3.3.el7.x86_64.rpm
After the package is installed, we can simply install the latest
$ sudo dnf install docker-ce Dependencies resolved. ======================================================================================================================================================= Package Arch Version Repository Size ======================================================================================================================================================= Installing: docker-ce x86_64 3:19.03.2-3.el7 docker-ce-stable 24 M Installing dependencies: docker-ce-cli x86_64 1:19.03.2-3.el7 docker-ce-stable 39 M tar x86_64 2:1.30-4.el8 rhel-8-for-x86_64-baseos-rpms 838 k libcgroup x86_64 0.41-19.el8 rhel-8-for-x86_64-baseos-rpms 70 k Transaction Summary ======================================================================================================================================================= Install 4 Packages Total download size: 65 M Installed size: 275 M Is this ok [y/N]:
This option is less convenient since the
containerd.io package is not installed as a dependency of
docker-ce, therefore it will not be removed automatically when the latter is uninstalled from the system.
Whatever method we use to install
docker-ce, as said before, in order to make
DNS resolution work inside Docker containers, we must disable firewalld (a system reboot may be also needed):
$ sudo systemctl disable firewalld
Start and enable the docker daemon
docker-ce is installed, we must start and enable the docker daemon, so that it will be also launched automatically at boot. The command we need to run is the following:
$ sudo systemctl enable --now docker
At this point, we can confirm that the daemon is active by running:
$ systemctl is-active docker active
Similarly, we can check that it is enabled at boot, by running:
$ systemctl is-enabled docker enabled
Docker compose is a very useful package which let us manage multi-container applications, like for example those based on the LAMP stack, where each part of the environment (PHP, Apache, MariaDB) is provided by a dedicated container (if you are interested in the subject, take a look at our tutorial about creating a docker-based lamp stack). The package is not available on Rhel8, nor an equivalent exists to be used with the Rhel tools. It’s, however, possible to install it in many ways: just keep on reading and decide what suits you best.
The way we should install
docker-compose varies depending on whether we want to install it globally or just for a single user. At the moment of writing, the only way to install it globally is to download the binary from the github page of the project:
$ curl -L "https://github.com/docker/compose/releases/download/1.23.2/docker-compose-$(uname -s)-$(uname -m)" -o docker-compose
Once the binary is downloaded, we move it into
/usr/local/bin and we make it executable:
$ sudo mv docker-compose /usr/local/bin && sudo chmod +x /usr/local/bin/docker-compose
/usr/local hierarchy is not chosen randomly. This directory structure is made to be used for files installed by the local administrator manually (for software compiled from source, for example), in order to ensure separation from the software installed with the system package manager.
Although it’s possible for a normal user to run docker-related commands if he is part of the
docker group (the group is automatically created when we install docker-ce), by default they must be executed with root privileges for security reasons. When we need to do the latter, since the
/usr/local/bin directory is not in the root user’s
PATH, we either need to call the binary specifying its location or add
/usr/local/bin to the
PATH itself. The first option is the one which I recommend in this case.
If our user is part of the
docker group, and thus it is allowed to run docker commands, and since
docker-compose is available as a python package, we can also install it using
pip, the python package manager. First, make sure pip itself is installed:
$ sudo dnf install python3-pip
To obtain docker-compose we run:
$ pip3.6 install docker-compose --user
Please notice that even if would be possible to run pip as root to install a package globally, this is not recommended and highly discouraged.
We installed docker and docker-compose, now to check that everything works as expected, we can try to build an image and run a container: in this case we will use the official
httpd one. All we have to do is to launch the following command:
sudo docker run --rm --name=linuxconfig-test -p 80:80 httpd
httpd image does not exists locally it will be automatically fetched and built. Finally, a container based on it will be launched in the foreground (it will be automatically removed when stopped). We should be able to see the
It works! message when we reach our machine ip via browser.
Red Hat Enterprise Linux 8 does not support Docker: on this distribution it has been replaced by Red Hat own tools like
podman, which are compatible with Docker but don’t need a server/client architecture to run. Using native tools, where possible, is always the recommended way to go, but for a reason or another you may still want to install the original Docker. In this tutorial, we saw how it is possible to install
Docker CE on Rhel8, by using the official Docker repository for CentOS7, which is a 100% compatible clone.
This is not an ideal solution, and as we saw, at the moment, some workarounds are needed to make Docker work on RHEL8. If some new issues arises, or better solutions to the problems mentioned above are found, this article will be updated accordingly. Stay tuned.
More on LinuxConfig.org:
You may also be interested in: